page_banner

product

trans-2-Hexenyl acetate(CAS#2497-18-9)

Chemical Property:

Molecular Formula C8H14O2
Molar Mass 142.2
Density 0.898 g/mL at 25 °C (lit.)
Melting Point -65.52°C (estimate)
Boling Point 165-166 °C (lit.)
Flash Point 137°F
JECFA Number 1355
Vapor Presure 1.87mmHg at 25°C
Appearance clear liquid
Specific Gravity 0.90
Color Colorless to Almost colorless
BRN 1721851
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Stability Stable. Combustible. Incompatible with strong bases, strong oxidizing agents.
Refractive Index n20/D 1.427(lit.)
Physical and Chemical Properties Colorless to light yellow liquid. The herb is fragrant. Boiling point 166 °c. Soluble in ethanol.

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S37/39 – Wear suitable gloves and eye/face protection
UN IDs UN 3272 3/PG 3
WGK Germany 2
RTECS MP8425000
TSCA Yes
HS Code 29153900
Hazard Class 3
Packing Group III

 

Introduction

Trans-2-hexene-acetate is an organic compound.

 

Quality:

trans-2-hexene-acetate is a colorless to light yellow liquid. It is insoluble in water but can be soluble in many organic solvents such as ethanol, ethers, and petroleum ethers.

 

Use:

trans-2-hexene-acetate is often used as a solvent in organic synthesis. It can also be used as a reagent and catalyst in organic synthesis reactions.

 

Method:

There are several methods for the preparation of trans-2-hexene-acetate, one of which is obtained by the reaction of acetic acid and 2-pentenol in the presence of an acidic catalyst. This reaction is usually performed at room temperature, and the product is purified by water washing and distillation at the end of the reaction.

 

Safety Information:

Trans-2-hexene-acetate is a flammable liquid and appropriate safety measures need to be taken. During use, contact with strong oxidants and high-temperature sources should be avoided to prevent fire or explosion. In addition, it should be used in a well-ventilated area to prevent vapor accumulation. Appropriate protective equipment, such as gloves and goggles, should be worn during operation to ensure safety.


  • Previous:
  • Next:

  • Write your message here and send it to us