page_banner

product

Tosyl chloride(CAS#98-59-9)

Chemical Property:

Molecular Formula C7H7ClO2S
Molar Mass 190.65
Density 1,006 g/cm3
Melting Point 65-69°C(lit.)
Boling Point 134°C10mm Hg(lit.)
Flash Point 128 °C
Water Solubility hydrolyses
Solubility methylene chloride: 0.2g/mL, clear
Vapor Presure 1 mm Hg ( 88 °C)
Appearance Crystalline Powder
Color White
Merck 14,9534
BRN 607898
Storage Condition Store below +30°C.
Stability Stable. Substances to be avoided include strong bases and strong oxidizing agents and water. Moisture sensitive.
Sensitive Moisture Sensitive
Refractive Index 1.545
Physical and Chemical Properties character: White rhomboid Crystal, irritating odor
solubility: insoluble in water, soluble in alcohol, ether, benzene
Use Used as analytical reagents, but also for organic synthesis, dye preparation and hormone synthesis in the molecular rearrangement reaction

Product Detail

Product Tags

Risk Codes R34 – Causes burns
R29 – Contact with water liberates toxic gas
R41 – Risk of serious damage to eyes
R38 – Irritating to the skin
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S27 – Take off immediately all contaminated clothing.
S39 – Wear eye / face protection.
UN IDs UN 3261 8/PG 2
WGK Germany 1
RTECS DB8929000
FLUKA BRAND F CODES 9-21
TSCA Yes
HS Code 29049020
Hazard Note Corrosive
Hazard Class 8
Packing Group II
Toxicity LD50 orally in Rabbit: 4680 mg/kg

 

Introduction

4-Toluenesulfonyl chloride is an organic compound. The following is an introduction to its nature, use, preparation method and safety information:

 

Quality:

- 4-Toluenesulfonyl chloride is a colorless to yellowish liquid with a pungent odor at room temperature.

- It is an organic acid chloride that reacts quickly with some nucleophiles such as water, alcohols, and amines.

 

Use:

- 4-Toluenesulfonyl chloride is often used as a reagent in organic synthesis for the synthesis of acyl compounds and sulfonyl compounds.

 

Method:

- The preparation of 4-toluenesulfonyl chloride is usually obtained by the reaction of 4-toluenesulfonic acid and sulfuryl chloride. The reaction is usually carried out at a lower temperature, such as under cooling conditions.

 

Safety Information:

- 4-Toluenesulfonyl chloride is an organic chloride compound that is a harsh chemical. When using, care should be taken to safe operation and avoid direct contact with the skin or inhalation of gases.

- Operate under well-ventilated laboratory conditions and be equipped with appropriate personal protective equipment such as gloves, safety goggles, and face shields.

- Inhalation or accidental ingestion may cause respiratory irritation, redness, swelling and pain. In the event of contact or accident, rinse the skin immediately with plenty of water and, if necessary, consult a doctor.


  • Previous:
  • Next:

  • Write your message here and send it to us