page_banner

product

tert-Butyl acrylate(CAS#1663-39-4)

Chemical Property:

Molecular Formula C7H12O2
Molar Mass 128.17
Density 0.875 g/mL at 25 °C (lit.)
Melting Point -69°C
Boling Point 61-63 °C/60 mmHg (lit.)
Flash Point 63°F
Water Solubility 2 g/L
Vapor Presure 20hPa at 23.4℃
Appearance Liquid
Color Clear
BRN 1742329
Storage Condition Flammables area
Refractive Index n20/D 1.410(lit.)

Product Detail

Product Tags

Risk Codes R11 – Highly Flammable
R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R37/38 – Irritating to respiratory system and skin.
R43 – May cause sensitization by skin contact
R52/53 – Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description S16 – Keep away from sources of ignition.
S25 – Avoid contact with eyes.
S37 – Wear suitable gloves.
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDs UN 1993 3/PG 2
WGK Germany 2
FLUKA BRAND F CODES 10
TSCA Yes
HS Code 29161290
Hazard Class 3
Packing Group III

 

Introduction

Tert-butyl acrylate is an organic compound. The following is an introduction to the properties, uses, preparation methods and safety information of tert-butyl acrylate:

 

Quality:

- Tert-butyl acrylate is a colorless, transparent liquid with a special odor.

- It has good solubility and can be dissolved in a variety of organic solvents, such as alcohols, ethers and aromatic solvents.

 

Use:

- Tert-butyl acrylate is commonly used in the manufacture of waterproof membranes, as an ingredient in coatings, adhesives and sealants, etc.

- It can also be used as a synthetic raw material for polymers and resins in the manufacture of plastics, rubber, textiles, and coatings, among others.

- In addition, tert-butyl acrylate can also be used in the manufacture of products such as flavors and fragrances.

 

Method:

- The preparation of tert-butyl acrylate can be obtained by esterification. A common method is to esterify acrylic acid and tert-butanol under acidic conditions to obtain tert-butyl acrylate.

 

Safety Information:

- Tert-butyl acrylate should be operated in a way that avoids contact with the skin and eyes and avoids inhaling its vapors.

- Store away from heat, open flames, and oxidizing agents.

- In case of accidental ingestion or inhalation, seek medical attention immediately and provide a MSDS for your doctor’s reference.

 


  • Previous:
  • Next:

  • Write your message here and send it to us