page_banner

product

(R)-(-)-2-methoxymethyl pyrrolidine(CAS# 84025-81-0)

Chemical Property:

Molecular Formula C6H13NO
Molar Mass 115.17
Density 0.932g/mLat 20°C(lit.)
Boling Point 61-62°C 40mm
Specific Rotation(α) -2.4o (C=2% IN BENZENE)
Flash Point 45°C
Vapor Presure 5.73mmHg at 25°C
Appearance Liquid
Color Clear colorless
BRN 4229755
pKa 10.01±0.10(Predicted)
Storage Condition under inert gas (nitrogen or Argon) at 2–8 °C
Sensitive Air Sensitive
Refractive Index n20/D 1.446

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes R10 – Flammable
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
UN IDs UN 1993 3/PG 3
WGK Germany 3
FLUKA BRAND F CODES 3-10-34
HS Code 29339900
Hazard Class 3
Packing Group III

 

Introduction

The (R)-(-)-2-methymethyl pyrrolidine ((R)-(-)-2-methymethyl pyrrolidine) is an organic compound with the chemical formula C7H15NO and a molecular weight of 129.20g/mol.

 

Nature:

(R)-(-)-2-methymethyl pyrrolidine is a colorless to light yellow liquid with a special smell. It can be dissolved in many organic solvents, such as ethanol, ether and dichloromethane.

 

Use:

(R)-(-)-2-methymethyl pyrrolidine is widely used in organic synthesis. It can be used as catalyst, solvent and medium in various reactions. It is often used as a chiral inducer in drug synthesis to control the reaction to produce a specific stereochemical structure. In addition, it can also be used in natural product synthesis and chemical research in organic synthesis.

 

Preparation Method:

(R)-(-)-2-methymethyl pyrrolidine can be prepared by the reaction of pyrrolidine and methyl p-toluenesulfonate. The specific synthesis method can refer to the relevant organic synthesis literature or patent.

 

Safety Information:

The toxicity of the (R)-(-)-2-methymethyl pyrrolidine is relatively low, but the corresponding safety operation regulations still need to be observed. It may be irritating to the eyes and skin, so avoid direct contact during operation. It should be operated in a well-ventilated area and care should be taken to avoid inhaling its vapors. Wear appropriate personal protective equipment such as gloves, goggles and protective clothing during use. If inhaled or taken by mistake, seek medical attention immediately.


  • Previous:
  • Next:

  • Write your message here and send it to us