page_banner

product

N-Methylacetamide(CAS# 79-16-3)

Chemical Property:

Molecular Formula C3H7NO
Molar Mass 73.09
Density 0.957 g/mL at 25 °C (lit.)
Melting Point 26-28 °C (lit.)
Boling Point 204-206 °C (lit.)
Flash Point 227°F
Water Solubility soluble
Solubility Soluble in water, ethanol, benzene, ether, chloroform, insoluble in petroleum ether.
Vapor Presure 12-3680Pa at 15-113℃
Appearance White crystal
Color Colourless Low-Melting
BRN 1071255
pKa 16.61±0.46(Predicted)
PH 7 (H2O)
Storage Condition Inert atmosphere,Room Temperature
Stability Stable. Combustible. Incompatible with strong oxidizing agents.
Sensitive Sensitive to light
Explosive Limit 3.2-18.1%(V)
Refractive Index n20/D 1.433(lit.)
MDL MFCD00008683
Physical and Chemical Properties White needle-like crystals. Melting point 30.55 ℃(28 ℃), boiling point 206 ℃,140.5 ℃(12kPa), relative density 0.9571(25/4 ℃), refractive index 1.4301, flash point 108 ℃. Soluble in water, ethanol, benzene, ether, chloroform, insoluble in petroleum ether.
Use Used as a solvent, also used in pharmaceutical

Product Detail

Product Tags

Hazard Symbols T – Toxic
Risk Codes 61 – May cause harm to the unborn child
Safety Description S53 – Avoid exposure – obtain special instructions before use.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
WGK Germany 2
RTECS AC5960000
TSCA Yes
HS Code 29241900
Toxicity LD50 oral in rat: 5gm/kg

 

Introduction

N-Methylacetamide is an organic compound. It is a colorless liquid that is soluble in water and many organic solvents at room temperature.

 

N-methylacetamide is commonly used in organic synthesis as a solvent and intermediate. N-methylacetamide can also be used as a dehydrating agent, ammoniating agent, and carboxylic acid activator in organic synthesis reactions.

 

The preparation of N-methylacetamide can generally be obtained by the reaction of acetic acid with methylamine. The specific step is to react acetic acid with methylamine at a molar ratio of 1:1 under appropriate conditions, and then distillation and purification to obtain the target product.

 

Safety information: The vapor of N-methylacetamide can irritate the eyes and respiratory tract, and has a mild irritating effect when in contact with the skin. When using or handling, personal protective measures should be taken, such as wearing protective glasses, protective gloves, etc. N-methylacetamide is also toxic to the environment, so it is necessary to comply with relevant environmental protection laws and regulations and pay attention to proper disposal of waste. When using and storing, the relevant safety operating procedures and operating guidelines must be followed.


  • Previous:
  • Next:

  • Write your message here and send it to us