page_banner

product

Methyl pyruvate(CAS# 600-22-6)

Chemical Property:

Molecular Formula C4H6O3
Molar Mass 102.09
Density 1.13 g/mL at 25 °C (lit.)
Melting Point -22 °C
Boling Point 134-137 °C (lit.)
Flash Point 103°F
Water Solubility Soluble in chloroform, methanol, ether, alcohol. Slightly soluble in water.
Solubility ethanol: soluble1.1g/10 mL, clear, colorless to almost colorless
Vapor Presure 7.7mmHg at 25°C
Appearance liquid
Color yellow cast
Merck 14,8021
BRN 1361953
Storage Condition 2-8°C
Refractive Index n20/D 1.404(lit.)
Physical and Chemical Properties Colorless liquid. Boiling point 136-137 °c.
Use Used as raw materials for medicine and pesticide intermediates

Product Detail

Product Tags

Risk Codes 10 – Flammable
Safety Description S23 – Do not breathe vapour.
S24/25 – Avoid contact with skin and eyes.
S16 – Keep away from sources of ignition.
UN IDs UN 3272 3/PG 3
WGK Germany 3
FLUKA BRAND F CODES 10-21
HS Code 29183000
Hazard Class 3
Packing Group III

 

Introduction

Methyl Ethyl Ketone Peroxide (MEKP) is an organic peroxide. The following is an introduction to the properties, uses, preparation methods and safety information of methapyruvate:

 

Quality:

- Appearance: Colorless to pale yellow liquid

- Flash Point: 7°C

 

Use:

- As an initiator: Methopyruvate is widely used as an organic peroxide initiator and can be used to initiate polymerization reactions in resin systems such as polyester, polyethylene, polypropylene, etc.

- Bleach: Methylpyruvate can be used to bleach pulp and paper to enhance its whiteness.

- Solvents: With its good solubility, methylpyruvate is used as a solvent, especially for the dissolution of certain resins and coatings.

 

Method:

The preparation of methylpyruvate can be obtained by the reaction of sodium hydroperoxide or tert-butyl hydroxyperoxide with acetone under alkaline conditions.

 

Safety Information:

- Methylpyruvate is an organic peroxide that is highly oxidizing and explosive. When storing and handling, the relevant safety operating procedures should be strictly observed, including avoiding contact with combustibles, preventing temperature rise, avoiding impact and friction, etc.

- During transportation, appropriate packaging and protective measures should be taken to ensure that it is not affected by heat, ignition and excitation conditions.

- Wear chemical gloves, goggles and gowns during use, ensure good ventilation, and avoid inhalation, contact with skin and eyes.

- In the event of a leak or accident, emergency measures should be taken immediately to remove the leakage and dispose of the waste properly.

 

When using methylpyruvate, relevant regulations and safety operating procedures should be strictly adhered to to ensure personal safety and environmental safety. It is important to store, handle and handle the substance properly.


  • Previous:
  • Next:

  • Write your message here and send it to us