page_banner

product

Heptaldehyde(CAS#111-71-7)

Chemical Property:

Molecular Formula C7H14O
Molar Mass 114.19
Density 0.817 g/mL at 25 °C (lit.)
Melting Point -43 °C (lit.)
Boling Point 153 °C (lit.)
Flash Point 95°F
JECFA Number 95
Water Solubility insoluble
Solubility 1.25g/l insoluble
Vapor Presure 3 hPa (20 °C)
Appearance Powder, Crystals or Chunks
Color White to light yellow-beige
Merck 14,4658
BRN 1560236
Storage Condition Flammables area
Stability Stable. May be light sensitive. Flammable – readily forms explosive mixtures with air. Incompatible with strong oxidizing agents, strong bases, strong reducing agents.
Sensitive Hygroscopic
Explosive Limit 1.1-5.2%(V)
Refractive Index n20/D 1.413(lit.)
Physical and Chemical Properties Colorless oily flammable liquid, with fruit flavor.
melting point -42 ℃
boiling point 153 ℃
relative density 0.817
refractive index 1.4151
solubility it is miscible with ethanol and ether, slightly soluble in water.
Use For organic synthesis and synthetic fragrances

Product Detail

Product Tags

Risk Codes R10 – Flammable
R36/37/38 – Irritating to eyes, respiratory system and skin.
R38 – Irritating to the skin
R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S37 – Wear suitable gloves.
S16 – Keep away from sources of ignition.
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
S60 – This material and its container must be disposed of as hazardous waste.
UN IDs UN 3056 3/PG 3
WGK Germany 1
RTECS MI6900000
TSCA Yes
HS Code 2912 19 00
Hazard Note Irritant
Hazard Class 3
Packing Group III
Toxicity LD50 orally in Rabbit: > 5000 mg/kg LD50 dermal Rabbit > 5000 mg/kg

 

Introduction

Heptanal. The following is an introduction to the properties, uses, preparation methods and safety information of heptanaldehyde:

 

Quality:

1. Appearance: Heptanal is a colorless liquid with a special pungent odor.

2. Density: Heptanal has a higher density, about 0.82 g/cm³.

4. Solubility: Heptanal is soluble in alcohol and ether solvents, but almost insoluble in water.

 

Use:

1. Heptanaldehyde is an important intermediate compound, which can be used in the production of biodiesel, ketones, acids and other compounds.

2. Heptanaldehyde is often used in the manufacture of synthetic fragrances, resins, plastics, etc.

3. Heptanaldehyde can also be used as a chemical reagent and can be used in organic synthesis, surfactant and other fields.

 

Method:

There are two main methods for the preparation of heptanaldehyde:

1. Heptane oxidation: Heptanaldehyde can be prepared by oxidation reaction between heptane and oxygen at high temperatures.

2. Etherification of vinyl alcohol: Heptanal can also be obtained by etherification of 1,6-hexadiene with vinyl alcohol.

 

Safety Information:

1. Heptanaldehyde has a pungent odor and has an irritating effect on the eyes and respiratory system, so it should be kept away from the eyes, mouth and nose.

2. Heptanaldehyde is irritating to the skin, so it should be rinsed with water immediately after contact.

3. Heptanaldehyde vapor can cause headache, dizziness and other uncomfortable symptoms, and should be used in a well-ventilated environment.

4. Heptanaldehyde is a flammable liquid, so avoid contact with open flames and high temperatures.

 


  • Previous:
  • Next:

  • Write your message here and send it to us