page_banner

product

Fast red F4R(CAS#6410-30-6)

Chemical Property:

Molecular Formula C24H17ClN4O4
Molar Mass 460.87
Density 1.40±0.1 g/cm3(Predicted)
Boling Point 641.3±55.0 °C(Predicted)
Water Solubility 40ng/L at 25℃
Vapor Presure 0Pa at 25℃
pKa 11.15±0.70(Predicted)
Storage Condition Room Temprature
Refractive Index 1.682
Physical and Chemical Properties solubility: yellow and red in concentrated sulfuric acid, red after dilution; Blue red in case of concentrated nitric acid; No change in sodium hydroxide aqueous solution.
hue or color: blue Red
specific surface area/(m2/g):50-60
hiding power: transparent
diffraction curve:
Use Mainly used for printing ink, paint, cultural supplies and cosmetics coloring
The pigment product type brand has 20 kinds, gives the pure blue red, with high coloring intensity, bright color light. Mainly used in printing ink coloring, transparent dosage forms in the packaging ink recrystallization, affect color and transparency, but the varnish, sterilization sensitive, heat-resistant 140 ℃/30min; it can also be used for fabric printing with low light fastness requirements.

Product Detail

Product Tags

 

Introduction

Permanent red F4R is an organic synthetic pigment with the chemical name C.I. Pigment Red 202。 The following is a detailed introduction to the properties, uses, manufacturing methods and safety information of Permanent Red F4R:- Permanent Red F4R is a red powdered solid with good durability and thermal stability. – It has good stability to light, acids, alkalis and solvents. Usage:- Permanent Red F4R can be used in the fields of dyes, inks, coatings and plastics. – It can be used for textile dyeing, plastic coloring, wet compresses, etc. Preparation method:- Permanent red F4R is mainly prepared by organic synthesis method, including the condensation reaction of aniline and corresponding aromatic acids. Safety Information:- When using Permanent Red F4R, you should follow the safety regulations of each place. – Red pigments may cause irritation to the skin, eyes, and respiratory system, and appropriate personal protective equipment such as glasses, gloves, and masks must be worn during handling and use. – Comply with relevant environmental and waste disposal regulations when disposing of waste.


  • Previous:
  • Next:

  • Write your message here and send it to us