page_banner

product

Ethyl anthranilate(CAS#87-25-2)

Chemical Property:

Molecular Formula C9H11NO2
Molar Mass 165.19
Density 1.117 g/mL at 25 °C (lit.)
Melting Point 13-15 °C (lit.)
Boling Point 129-130 °C/9 mmHg (lit.)
Flash Point >230°F
JECFA Number 1535
Solubility Insoluble in water but soluble in organic solvents
Vapor Presure 0.00954mmHg at 25°C
Vapor Density 5.7 (vs air)
Appearance Clear liquid
Specific Gravity 1.1170
Color Light yellow
BRN 878874
pKa 2.20±0.10(Predicted)
Storage Condition Keep in dark place,Inert atmosphere,Room temperature
Stability Stable. Combustible. Incompatible with acids, bases, oxidizing agents.
Refractive Index n20/D 1.564(lit.)
MDL MFCD00007711
Physical and Chemical Properties Appearance: colorless liquid boiling point: 129-130 ℃

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/38 – Irritating to eyes and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
WGK Germany 2
RTECS DG2448000
TSCA Yes
HS Code 29224999
Hazard Note Irritant
Toxicity The acute oral LD50 value in rats was reported as 3.75 g/kg (3.32-4.18 g/kg) and the acute dermal LD50 value in rabbits exceeded 5 g/kg (Moreno, 1975).

 

Introduction

Orthanilic acid ester is an organic compound.

 

Quality:

Appearance: Anthanimates are colorless to yellowish solids.

Solubility: Soluble in common organic solvents such as alcohols, ethers, and ketones.

 

Use:

Dye intermediates: Anthaminobenzoates can be used as synthetic intermediates for dyes and are used in the production of various dyes, such as azo dyes.

Photosensitive materials: anthranimates can be used as photosensitive materials for the preparation of light-curing resins and photosensitive nanomaterials.

 

Method:

There are many preparation methods for anthranilates, and the common methods are obtained by reacting chlorobenzoates with ammonia.

 

Safety Information:

Anthanimates are irritating and should be washed off when in contact with skin and eyes.

During use, good ventilation conditions should be ensured to avoid inhaling gases or dust.

Collision and friction should be avoided during storage and handling, and fire and heat sources should be prevented.

If ingested or inhaled, seek medical attention immediately and bring the packaging with you.


  • Previous:
  • Next:

  • Write your message here and send it to us