DL-3-Methylvaleric acid(CAS#105-43-1)
| Hazard Symbols | C – Corrosive |
| Risk Codes | 34 – Causes burns |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3265 8/PG 2 |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 13 |
| TSCA | T |
| HS Code | 29159080 |
| Hazard Note | Corrosive |
| Hazard Class | 8 |
| Packing Group | II |
Introduction
3-Methylpentanoic acid is an organic compound. The following is an introduction to the properties, uses, preparation methods and safety information of 3-methylpentanoic acid:
Quality:
- Appearance: 3-Methylpenteric acid is a colorless liquid.
- Solubility: Soluble in water and common organic solvents.
- Odor: A pungent sour odor.
Use:
- 3-Methylpentanoic acid is often used as a chemical intermediate in the synthesis of other organic compounds.
- It can also be used as a catalyst in some fields.
Method:
- 3-Methylpenteric acid can be obtained by addition polymerization of propylene carbonate. Methylvaleric anhydride reacts with methacrylenol in a reaction solvent to form 3-methylpentanoate. Then, 3-methylvaleric acid is reacted with hydrocyanic acid to obtain 3-methylpentanoic acid.
Safety Information:
- 3-Methylpentanoic acid is an irritant that may cause irritation in contact with the skin and eyes. Protective gloves and eye protection should be worn when using.
- During storage and use, it is necessary to maintain a well-ventilated environment and avoid contact with fire.
