5-Fluoro-2-methylaniline（CAS# 367-29-3)
| Risk Codes | R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 – Irritating to eyes, respiratory system and skin. R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed. |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 – Take off immediately all contaminated clothing. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36 – Wear suitable protective clothing. |
| UN IDs | UN 1325 4.1/PG 2 |
| WGK Germany | 3 |
| HS Code | 29214300 |
| Hazard Note | Toxic/Irritant |
| Hazard Class | 6.1 |
| Packing Group | III |
Introduction
5-Fluoro-2-methylaniline. The following is an introduction to some of its properties, uses, manufacturing methods and safety information:
Quality:
- Appearance: Colorless or yellowish crystals
- Solubility: soluble in organic solvents such as ethanol and methylene chloride, insoluble in water
Use:
- Also commonly used in dyes, pigments, and photosensitive materials.
Method:
- The preparation of 5-fluoro-2-methylaniline can be achieved through a variety of ways, one of which is commonly used by fluorinating methylaniline. Hydrofluoric acid can be used as a fluorine source for this reaction.
Safety Information:
- 5-Fluoro-2-methylaniline is an organic compound with certain toxicity
1. Avoid direct contact with skin and eyes, and avoid inhaling their vapors or dust.
2. Wear protective gloves, glasses and masks when using.
3. Operate in a well-ventilated environment.
4. Do not mix this compound with strong oxidizing agents or strong acids.
5. In case of accidental contact or inhalation, move to a well-ventilated place immediately, rinse the affected area thoroughly with clean water, and seek medical attention promptly.
