page_banner

product

5-Bromo-2-furoic acid(CAS#585-70-6)

Chemical Property:

Molecular Formula C5H3BrO3
Molar Mass 190.98
Density 1.7703 (rough estimate)
Melting Point 188-190°C(lit.)
Boling Point 281.6±25.0 °C(Predicted)
Flash Point 124.1°C
Vapor Presure 0.00167mmHg at 25°C
Appearance Crystallization
Color White to cream or beige
BRN 118354
pKa 2.84±0.10(Predicted)
Storage Condition Keep in dark place,Sealed in dry,Room Temperature
Refractive Index 1.4690 (estimate)
MDL MFCD00003239

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36 – Irritating to the eyes
Safety Description S24/25 – Avoid contact with skin and eyes.
S39 – Wear eye / face protection.
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
WGK Germany 3
HS Code 29321900
Hazard Class IRRITANT

 

Introduction

5-Bromofuranoic acid is an organic compound. The following is an introduction to the properties, uses, preparation methods and safety information of 5-bromofuranoic acid: Properties:- 5-bromofuranoic acid is a solid, colorless or white crystal, with a special phenol odor at room temperature. – It is soluble in water and most organic solvents and is acidic in water. Usage:- It can be used as a raw material for pesticides, fungicides, and herbicides to protect crops from insects and pathogens. – 5-Bromofuranoic acid can also be used in the synthesis of dyes and coatings. Preparation method: – The preparation method of 5-bromofuranoic acid is usually obtained by reacting furan with bromine. – Dissolve furan in an appropriate solvent, add bromine, and heat the reaction. – After the reaction is completed, a pure 5-bromofuranoic acid product can be obtained through the cooling and crystallization process. Safety Information:- When using 5-bromofuranoic acid, avoid inhaling its dust or gas, and wear respiratory protective equipment if necessary. – When exposed to 5-bromofuranoic acid, rinse the contaminated area quickly with plenty of water and seek medical assistance. – During operation, the relevant safety operating procedures should be followed, and the experiment should be ensured to be carried out under appropriate ventilation conditions.


  • Previous:
  • Next:

  • Write your message here and send it to us