page_banner

product

5-BROMO-2-CARBOXY-3-METHYLPYRIDINE(CAS# 886365-43-1)

Chemical Property:

Molecular Formula C7H6BrNO2
Molar Mass 216.03
Density 1.692±0.06 g/cm3(Predicted)
Melting Point 161-163oC
Boling Point 330.5±42.0 °C(Predicted)
Flash Point 153.7°C
Solubility DMSO (Slightly), Methanol (Slightly)
Vapor Presure 6.63E-05mmHg at 25°C
Appearance Powder
Color Off-white
pKa 3.04±0.37(Predicted)
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Refractive Index 1.602
MDL MFCD07375125
Physical and Chemical Properties 5-Bromo-3-methylpyridine-2-carboxylic acid is an organic chemical with a density of 1.692g/cm3, a boiling point of 330.5°C at 760 mmHg, and a 1.602 refractive index. 5-Bromo-3-methylpyridine-2-formic acid can be used as an intermediate in pharmaceutical and chemical synthesis.

Product Detail

Product Tags

Safety Description S如果吸入5 -
S溴 -
S3 – Keep in a cool place.
S甲基吡啶 -
S2 – Keep out of the reach of children.
S甲酸,请将患者移到新鲜空气处;如果皮肤接触,应脱去污染的衣着,用肥皂水和清水彻底冲洗皮肤,如有不适感,就医;如果眼晴接触,应分开眼睑,用流动清水或生理盐水冲洗,并立即就医;如果食入,立即漱口,禁止催吐,应立即就医。 -
UN IDs UN2811

 

Introduction

5-Bromo-3-methylpyridine-2-carboxylic acid is an organic compound. Here are some of the properties, uses, preparation methods, and safety information of this compound:

 

Quality:

- Appearance: Colorless or yellowish crystals

- Solubility: soluble in ethanol and ether, slightly soluble in water.

 

Use:

- 5-Bromo-3-methylpyridine-2-carboxylic acid is commonly used as a catalyst and a precursor of liquid crystal materials in organic synthesis.

 

Method:

5-Bromo-3-methylpyridine-2-carboxylic acid can be prepared by:

3-methylpyridine-2-carboxylic acid was taken as raw material, sodium bromide, sulfonyl chloride and dimethylformamide were added to form 5-bromo-3-methylpyridine-2-carboxylic acid.

It can be obtained by oxidation of 5-bromo-3-methylpyridine-2-ol.

 

Safety Information:

- 5-Bromo-3-methylpyridine-2-carboxylic acid should be stored and handled in a way that avoids contact with strong oxidants.

- It can be irritating and corrosive to the eyes, skin, and respiratory tract, and use personal protective equipment such as gloves, goggles, and respirators when using caution when touching.

- When handling or storing, avoid high temperatures and ignition sources to prevent them from burning or releasing toxic gases.

- Follow safe operating procedures when using and handling the compound and follow relevant chemical safety precautions.


  • Previous:
  • Next:

  • Write your message here and send it to us