page_banner

product

4-Chloro-3-ethylphenol(CAS#14143-32-9)

Chemical Property:

Molecular Formula C8H9ClO
Molar Mass 156.61
Density 1.180±0.06 g/cm3(Predicted)
Melting Point 45-50 °C (lit.)
Boling Point 248.1±20.0 °C(Predicted)
Flash Point >230°F
Vapor Presure 0.0157mmHg at 25°C
Appearance Bright yellow to white-like solid
pKa 9.62±0.18(Predicted)
Storage Condition Room Temprature
Refractive Index 1.555
MDL MFCD00010822

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39 – Wear suitable gloves and eye/face protection
S36 – Wear suitable protective clothing.
WGK Germany 3
HS Code 29071990

 

Introduction

4-Chloro-3-ethylphenol, also known as p-chloro-p-ethylphenol, is an organic compound. The following describes its nature, use, preparation and safety information:

 

Nature:

-Appearance: 4-Chloro-3-ethylphenol is a colorless or white crystalline solid.

-Solubility: It is soluble in alcohol and ether solvents, slightly soluble in water.

 

Use:

-Fungicide: It has bactericidal, antibacterial and antifungal properties, and is commonly used as a topical fungicide, such as in soap, hand sanitizer, detergent and other products.

-Medical use: 4-Chloro-3-ethylphenol is also used as a pharmaceutical intermediate for the synthesis of some drugs.

 

Preparation Method:

-4-Chloro-3-ethylphenol can be prepared by reacting p-ethylphenol with phosphorus pentachloride. The specific synthesis steps need to be carried out in the chemical laboratory, which requires certain chemical knowledge and experimental operation skills.

 

Safety Information:

-For any chemical substance, carefully read and follow the operating instructions in the safety data sheet (SDS) before use. 4-Chloro-3-ethylphenol should be handled under suitable laboratory conditions.

-It is a toxic substance, contact or inhalation of 4-chloro-3-ethylphenol may cause health hazards. Care should be taken to avoid direct contact with skin and eyes and to ensure adequate ventilation.

-During handling and storage, the relevant safety procedures should be strictly observed and properly stored to prevent contact with ignition or oxidizing agents.

-In case of inhalation, ingestion or skin contact, rinse immediately with plenty of water and seek medical attention.

 

Please note that in the process of using 4-chloro-3-ethylphenol or any other chemical substances, relevant regulations should be followed and appropriate safety measures should be taken.


  • Previous:
  • Next:

  • Write your message here and send it to us