page_banner

product

4-Chloro-2-fluorotoluene(CAS# 452-75-5)

Chemical Property:

Molecular Formula C7H6ClF
Molar Mass 144.57
Density 1.186 g/mL at 25 °C (lit.)
Boling Point 158 °C/743 mmHg (lit.)
Flash Point 124°F
Water Solubility INSOLUBLE
Vapor Presure 23.4mmHg at 25°C
Appearance clear liquid
Specific Gravity 1.186
Color Colorless to Light yellow to Light orange
BRN 1931682
Storage Condition Flammables area
Refractive Index n20/D 1.498(lit.)
Physical and Chemical Properties Boiling Point: 153 at 743mm Hgdensity: 1.186

flash point: 51

Use Used as pharmaceutical, pesticide intermediates

Product Detail

Product Tags

Risk Codes R10 – Flammable
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S16 – Keep away from sources of ignition.
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S37/39 – Wear suitable gloves and eye/face protection
S36 – Wear suitable protective clothing.
UN IDs UN 1993 3/PG 3
WGK Germany 3
HS Code 29039990
Hazard Note Irritant/Flammable
Hazard Class 3
Packing Group III

 

Introduction

2-Fluoro-4-chlorotoluene is an organic compound. The following is an introduction to the properties, uses, preparation methods, and safety information of this compound:

 

Quality:

2-Fluoro-4-chlorotoluene is a colorless liquid with a sweet musky flavor. It is soluble in organic solvents such as ethers and alcohols, but insoluble in water.

 

Use:

2-Fluoro-4-chlorotoluene is an important intermediate in organic synthesis. It can also be used as a solvent.

 

Method:

2-Fluoro-4-chlorotoluene can be prepared by reacting 2,4-dichlorotoluene with hydrogen fluoride. This reaction usually takes place under acidic conditions. First, 2,4-dichlorotoluene and hydrogen fluoride are added to the reaction vessel and the reaction is stirred at an appropriate temperature for a period of time. Then, through distillation and purification steps, 2-fluoro-4-chlorotoluene is obtained.

 

Safety Information:

2-Fluoro-4-chlorotoluene is irritating and corrosive. Contact with skin and eyes may cause irritation and burns. Appropriate protective gloves, glasses, and protective clothing should be worn when handling and using it. If inhaled or ingested, seek medical attention immediately. In terms of storage and transportation, contact with strong oxidizing agents and strong acids should be avoided.


  • Previous:
  • Next:

  • Write your message here and send it to us