page_banner

product

3,4-epoxycyclohexylmethyl 3,4-epoxycyclo-hexaneca(CAS#2386-87-0)

Chemical Property:

Molecular Formula C14H20O4
Molar Mass 252.31
Density 1.17g/mLat 25°C(lit.)
Melting Point −37°C(lit.)
Boling Point 355.49°C (rough estimate)
Flash Point 245°F
Water Solubility 13.85g/L at 20.2℃
Solubility Chloroform (Slightly), Dichloromethane (Slightly)
Vapor Presure 0.002Pa at 25℃
Appearance Oil
Specific Gravity 1.170
Color Colourless
pKa 4.61±0.20(Predicted)
Storage Condition 2-8°C
Refractive Index n20/D 1.498(lit.)
Use Uses epoxy resin intermediates; Food packaging materials coating; Can be used for optical modeling, making medical models; Electronic materials intermediates; Automotive primer; High voltage cable

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 43 – May cause sensitization by skin contact
Safety Description 36/37 – Wear suitable protective clothing and gloves.
WGK Germany 1
RTECS RN7750000
HS Code 29189900
Toxicity LD50 oral in rat: 4490mg/kg

 

Introduction

3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexylcarboxylate, also known as diglycidyl cyclohexane-4,5-epoxydicarboxylate, is an organic compound. The following is a detailed description of the compound’s properties, uses, preparation methods, and safety information:Quality:- Appearance: 3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexylcarboxylate is a colorless or light yellow liquid.- Melting Point: about 20-21°C.- Solubility: Soluble in some organic solvents such as alcohols and ethers.Use:- Can be used as a synthetic intermediate for epoxy resins.- Its low toxicity and good mechanical properties can be used in the preparation of various high-performance composites, adhesives and coatings.- Commonly used in industry in the preparation of coatings and sealants, providing excellent chemical and high temperature resistance.- It can also be used to prepare other functional polymer materials, such as elastomers and plastics.Method:3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexylcarboxylate can be prepared by the following steps:3,4-epoxycyclohexylmethanol was reacted with anhydrous sulfuric acid to obtain 3,4-epoxycyclohexylcarboxylic acid.3,4-epoxycyclohexylcarboxylic acid is reacted with methanol to obtain methyl 3,4-epoxycyclohexylcarboxylic acid.Methyl 3,4-epoxycyclohexylcarboxylate was reacted with methacrylate, and 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexylcarbamate was prepared by epoxidation.Safety Information:- 3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexylcarbamate should be avoided from contact with skin, eyes, and mucous membranes. Rinse with plenty of water immediately after contact.- Personal protective equipment such as protective gloves, goggles, and gowns should be worn when using the compound.- During storage and handling, it should be kept away from fire sources and high-temperature environments to prevent it from burning or exploding.- When handling the compound, it should be done in a well-ventilated area to keep the air fresh and avoid inhaling harmful gases.- Properly store, handle and dispose of the compound in accordance with relevant regulations to avoid environmental and health hazards.


  • Previous:
  • Next:

  • Write your message here and send it to us