page_banner

product

3-Fluorobenzaldehyde(CAS# 456-48-4)

Chemical Property:

Molecular Formula C7H5FO
Molar Mass 124.11
Density 1.17g/mLat 25°C(lit.)
Melting Point 173 C
Boling Point 66-68°C20mm Hg(lit.)
Flash Point 134°F
Solubility Chloroform, Methanol
Vapor Presure 1.28mmHg at 25°C
Appearance Liquid
Specific Gravity 1.170
Color Clear colorless to yellow
BRN 970178
Storage Condition Inert atmosphere,2-8°C
Sensitive Air Sensitive
Refractive Index n20/D 1.518(lit.)
Physical and Chemical Properties Boiling point of 66-68 deg C (20mmHg), flash point 56 deg C, the relative density of 1.17.
Use Used as pesticide, pharmaceutical intermediates

Product Detail

Product Tags

Risk Codes R37/38 – Irritating to respiratory system and skin.
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S24/25 – Avoid contact with skin and eyes.
S37/39 – Wear suitable gloves and eye/face protection
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S27 – Take off immediately all contaminated clothing.
UN IDs UN 1989 3/PG 3
WGK Germany 3
TSCA T
HS Code 29130000
Hazard Note Flammable
Hazard Class 3
Packing Group III

 

Introduction

M-fluorobenzaldehyde. The following is an introduction to the properties, uses, preparation methods and safety information of m-fluorobenzaldehyde:

 

Quality:

- Appearance: M-fluorobenzaldehyde is a colorless or yellowish liquid.

- Solubility: Soluble in organic solvents such as ethers, alcohols and ether alcohols.

 

Use:

- High-efficiency insecticides: M-fluorobenzaldehyde, as an intermediate in organic synthesis, is widely used in the agricultural field to prepare high-efficiency insecticides, such as insecticides CFOFLUOROETHYLENE or other insecticide raw materials.

- Chemical synthesis: M-fluorobenzaldehyde is often used as an intermediate in organic synthesis and can be used to prepare other compounds, such as m-fluorophenyl oxalate and camphor ethanol.

 

Method:

- There are two main preparation methods for m-fluorobenzaldehyde: fluoride method and fluorination method. Among them, the fluoride method is obtained by reacting m-fluorophenylmagnesium fluoride with formaldehyde; The fluorination method is obtained by hydrolysis of p-toluene and antimony trichloride in a chlorine atmosphere.

 

Safety Information:

- It is very important that m-fluorobenzaldehyde is a toxic substance and should be operated in well-ventilated conditions and appropriate personal protective equipment should be worn.

- During use or storage, avoid mixing with strong oxidants, alcohols and other substances to avoid dangerous reactions.

- Keep the container tightly sealed and away from fire and heat sources when storing.


  • Previous:
  • Next:

  • Write your message here and send it to us