page_banner

product

3-Chlorobenzotrifluoride(CAS# 98-15-7)

Chemical Property:

Molecular Formula C7H4ClF3
Molar Mass 180.55
Density 1.331 g/mL at 25 °C
Melting Point -56 °C (lit.)
Boling Point 137-138 °C (lit.)
Flash Point 97°F
Water Solubility <0.1 g/100 mL at 22 ºC
Vapor Presure 9.37mmHg at 25°C
Appearance clear liquid
Specific Gravity 1.336
Color Colorless to Almost colorless
Exposure Limit ACGIH: TWA 2.5 mg/m3NIOSH: IDLH 250 mg/m3
BRN 510215
Refractive Index n20/D 1.446(lit.)
Physical and Chemical Properties Colorless transparent liquid. Specific gravity 1.336, melting point -56 ℃, boiling point 137-138 ℃, refractive index 1.4460(20 ℃), relative density 1.331, flash point 38 ℃. Soluble in ethanol, ether, etc.

Product Detail

Product Tags

Risk Codes R10 – Flammable
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S16 – Keep away from sources of ignition.
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S24/25 – Avoid contact with skin and eyes.
UN IDs UN 2234 3/PG 3
WGK Germany 1
RTECS XS9142000
TSCA T
HS Code 29039990
Hazard Note Flammable/Irritant
Hazard Class 3
Packing Group III

 

Introduction

M-chlorotrifluorotoluene is an organic compound. It is a colorless liquid with a strong aromatic flavor. The following is an introduction to the properties, uses, preparation methods and safety information of m-chlorotrifluorotoluene:

 

Quality:

- Appearance: Colorless liquid

- Solubility: Slightly soluble in water, good solubility in organic solvents

 

Use:

- M-chlorotrifluorotoluene is mainly used as a refrigerant and firefighting gas.

- It can also be used as a solvent and catalyst in reactions, and is commonly used in organic synthesis and some reactions in chemical laboratories.

 

Method:

- M-chlorotrifluorotoluene is usually prepared by the reaction of chlorotrifluoromethane and chlorotoluene. The reaction usually takes place at high temperatures and requires the presence of a catalyst.

 

Safety Information:

- It has a low explosion limit, but explosions can occur at high temperatures and with strong ignition sources.

- Avoid direct contact with skin and eyes and avoid inhaling their vapors when using.

- Ensure good ventilation and take appropriate protective measures, such as protective eyewear and gloves, during use.

- In the event of an accidental leak, the leakage should be removed quickly to avoid polluting the environment.

- During handling and storage, relevant safe practices and national regulations should be followed.


  • Previous:
  • Next:

  • Write your message here and send it to us