3-Chloro-2-fluoroaniline(CAS#2106-04-9)
| Risk Codes | R36/37/38 – Irritating to eyes, respiratory system and skin. R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed. R41 – Risk of serious damage to eyes R37/38 – Irritating to respiratory system and skin. R22 – Harmful if swallowed R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed. |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 – Wear suitable protective clothing. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S39 – Wear eye / face protection. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| WGK Germany | 3 |
| TSCA | Yes |
| HS Code | 29214200 |
| Hazard Note | Toxic |
| Hazard Class | IRRITANT |
Introduction
3-Chloro-2-fluoroaniline. The following is an introduction to the properties, uses, preparation methods and safety information of 3-chloro-2-fluoroaniline:Quality:Appearance: Colorless to yellowish liquid.Density: 1.43 g/mL.Solubility: soluble in organic solvents such as methyl chloride and methylene chloride, slightly soluble in water.Use:Method:3-Chloro-2-fluoroaniline can be obtained by the reaction of aniline with chlorofluoroalkane. There are a variety of preparation methods, such as catalysis with cuprous chloride and cuprous fluoride, or hydrofluoric acid and chlorinated alkanes.Safety Information:3-Chloro-2-fluoroaniline should be operated in a well-ventilated area and avoid contact with skin, eyes, and mucous membranes.Attention should be paid to fire and explosion protection measures when using, and personal protective equipment such as chemical protective glasses and gloves should be used.Waste disposal should comply with relevant regulations and should not be discharged directly into the environment.During use, the relevant operating procedures and safety operation guidelines should be observed.
