3-Bromofuran(CAS#22037-28-1)
| Risk Codes | R11 – Highly Flammable R36/37/38 – Irritating to eyes, respiratory system and skin. |
| Safety Description | S16 – Keep away from sources of ignition. S23 – Do not breathe vapour. S24/25 – Avoid contact with skin and eyes. S37/39 – Wear suitable gloves and eye/face protection S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S33 – Take precautionary measures against static discharges. S29 – Do not empty into drains. S7/9 - |
| UN IDs | UN 1993 3/PG 2 |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 10 |
| HS Code | 29321900 |
| Hazard Note | Highly Flammable/Irritant |
| Hazard Class | 3 |
| Packing Group | II |
Introduction
3-Bromofuran is an organic compound. The following is an introduction to some of its properties, uses, preparation methods and safety information: Properties:- 3-bromofuran is a colorless to slightly yellow liquid with a special odor. – It has good solubility and is soluble in a variety of organic solvents, such as ethanol, ethers and chlorinated hydrocarbons. – It can undergo polymerization reactions to form polymer compounds. Uses:-3-Bromofuran is widely used in the field of organic synthesis. – It has a special ring structure and can also be applied to the preparation of photosensitive materials and liquid crystal displays. Preparation method: – The commonly used method for the preparation of 3-bromofuran is obtained by the reaction of bromofuran. – The specific preparation method can be to pass bromine gas through the furan and heat it to obtain 3-bromofuran. Safety Information:- 3-Bromofuran is toxic and may cause health and environmental hazards. – When using and storing, contact with strong oxidants and strong acids should be avoided to prevent dangerous reactions. – Chemical gloves, glasses and protective clothing should be worn for protection during operation. – When disposing of waste, we will comply with environmental laws and regulations and take appropriate disposal methods.
