page_banner

product

3 5-difluorobenzaldehyde(CAS# 32085-88-4)

Chemical Property:

Molecular Formula C7H4F2O
Molar Mass 142.1
Density 1.296 g/mL at 20 °C (lit.)
Melting Point 17°C
Boling Point 61-63°C 43mm
Flash Point 133°F
Vapor Presure 0.292mmHg at 25°C
Appearance Liquid After Melting
Color Clear light green
BRN 2573392
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Sensitive Air Sensitive
Refractive Index n20/D 1.493(lit.)
Physical and Chemical Properties Colorless to light yellow liquid

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S37/39 – Wear suitable gloves and eye/face protection
UN IDs UN 1989 3/PG 3
WGK Germany 3
FLUKA BRAND F CODES 10-21
HS Code 29124990
Hazard Note Irritant
Hazard Class 3
Packing Group III

 

Introduction

3,5-difluorobenzaldehyde is an organic compound with the chemical formula C7H4F2O. The following is a description of the properties, uses, preparation and safety information of the compound:

 

Properties: 3,5-difluorobenzaldehyde is a colorless to light yellow solid with a special phenone odor. It has a density of 1.383g/cm³, a melting point of 48-52°C, and a boiling point of 176-177°C. 3,5-difluorobenzaldehyde is insoluble in water, but soluble in organic solvents such as ethanol, ether, and benzene.

 

Uses: 3,5-difluorobenzaldehyde is commonly used as an intermediate in organic synthesis. It can be used to synthesize various fluorine-containing organic compounds, especially for chemical reactions that introduce fluorine atoms into organic molecules. In addition, it can also be used as a synthetic intermediate for drugs, pesticides and dyes.

 

preparation method: the preparation method of 3,5-difluorobenzaldehyde can be obtained by reacting 3,5-difluorobenzyl methanol with an acid aldehyde reagent (such as trichloroformic acid, etc.). Specific synthetic methods can refer to the Organic Synthesis Handbook and related literature.

 

Safety information: 3,5-difluorobenzaldehyde is a chemical and needs to be used safely. It is irritating and corrosive and may cause damage to the eyes, skin and respiratory system. Appropriate personal protective equipment such as goggles, gloves and face shields should be worn during use. Follow laboratory safety practices and store, handle and dispose of the compound properly. In case of accidental contact or ingestion, seek medical attention immediately and provide the necessary information to the doctor.


  • Previous:
  • Next:

  • Write your message here and send it to us