page_banner

product

3 5-DIBROMO-2-FLUOROPYRIDINE(CAS# 473596-07-5)

Chemical Property:

Molecular Formula C5H2Br2FN
Molar Mass 254.88
Density 2.137±0.06 g/cm3(Predicted)
Boling Point 220.5±35.0 °C(Predicted)
pKa -5.14±0.20(Predicted)
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Refractive Index 1.466

Product Detail

Product Tags

Risk Codes R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 – Irritating to eyes, respiratory system and skin.
R25 – Toxic if swallowed
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
Hazard Class IRRITANT

 

Introduction

3,5-Dibromo-2-fluoropyridine is an organic compound with the chemical formula C5H2Br2FN. The following is a description of its nature, use, formulation and safety information:

 

Nature:

- 3,5-Dibromo-2-fluoropyridine is a solid compound with a white crystalline appearance.

-Its melting point is 74-76 ℃, and its boiling point is 238-240 ℃.

-It is insoluble in water at room temperature, but can be dissolved in some organic solvents such as ether and ethanol.

 

Use:

- 3,5-Dibromo-2-fluoropyridine is an important intermediate compound widely used in organic synthesis reactions.

-It can be used as a raw material for organic photovoltaic materials, and can also be used to prepare medicines, dyes and pesticides.

 

Preparation Method:

- 3,5-Dibromo-2-fluoropyridine can be prepared by the reaction of pyridine iodide and cuprous bromide.

-First dissolve cuprous bromide and pyridine iodide in dimethyl sulfoxide at room temperature to form a reactant, then slowly add silver fluoride dropwise at low temperature, and finally heat until the reaction is completed.

 

Safety Information:

- 3,5-Dibromo-2-fluoropyridine is irritating to the skin and eyes, and protective measures should be paid attention to when in contact.

-Pay attention to good ventilation when using this compound.

-It decomposes at high temperature will produce harmful gases, and it is necessary to avoid exposure to open flames or high temperature environments.

-Store it in a sealed manner and avoid contact with oxidants and strong acids to avoid dangerous reactions.


  • Previous:
  • Next:

  • Write your message here and send it to us