page_banner

product

2,4,5-Trifluoro-3-methoxybenzoic(CAS#112811-65-1)

Chemical Property:

Molecular Formula C8H5F3O3
Molar Mass 206.12
Density 1.472g/mLat 25°C(lit.)
Melting Point 105-112°C(lit.)
Boling Point 284.3±35.0 °C(Predicted)
Flash Point 126°F
Vapor Presure 0.296mmHg at 25°C
Appearance White to light yellow crystal powder
Color White to Almost white
BRN 7428474
pKa 2.75±0.10(Predicted)
Storage Condition Sealed in dry,Room Temperature
Refractive Index n20/D 1.503(lit.)
Physical and Chemical Properties Melting Point: 114 – 119 ℃

white or off-white crystals

Use Used as pharmaceutical intermediates, mainly for the synthesis of quinolone broad-spectrum antibiotics

Product Detail

Product Tags

Risk Codes R34 – Causes burns
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36 – Wear suitable protective clothing.
UN IDs UN 1760 8/PG 2
WGK Germany 3
HS Code 29189900
Hazard Note Irritant

 

Introduction

2,4,5-Trifluoro-3-methoxybenzoic acid.

 

Quality:

- Appearance: 2,4,5-trifluoro-3-methoxybenzoic acid is a colorless crystal or white solid.

- Solubility: soluble in organic solvents such as alcohols and ethers, insoluble in water.

- Stability: Stable under normal storage and use conditions.

 

Use:

- It is often used as a catalyst or reagent in organic synthesis reactions, for fluorination reactions or similar chemical conversions.

 

Method:

2,4,5-Trifluoro-3-methoxybenzoic acid is usually prepared by a synthetic route, which involves the substitution of methylbenzoic acid with appropriate chemical reagents, and the introduction of fluorine atoms and methoxy groups in the synthesis process.

 

Safety Information:

- 2,4,5-Trifluoro-3-methoxybenzoic acid should be operated in a well-ventilated area and avoid inhaling its gases or coming into contact with the skin, eyes, or taking it.

- Wear appropriate personal protective equipment, including chemical gowns, gloves, and eyeglasses, when in use.

- Follow relevant safety operating procedures during use and storage, and avoid contact with flammable substances or oxidizing agents.

- In the event of an accidental leak or accident, appropriate measures should be taken immediately to deal with and clean up to avoid pollution to the environment.

 

Please read and follow the relevant safety instructions and precautions for the chemical carefully before use.


  • Previous:
  • Next:

  • Write your message here and send it to us