page_banner

product

2-Phenyl-1-propene(CAS#98-83-9)

Chemical Property:

Molecular Formula C9H10
Molar Mass 118.18
Density 0.909g/mLat 25°C(lit.)
Melting Point −24°C(lit.)
Boling Point 165-169°C(lit.)
Flash Point 114°F
Water Solubility insoluble
Solubility 560mg/l
Vapor Presure 2.1 mm Hg ( 20 °C)
Vapor Density 4.1 (vs air)
Appearance Liquid
Color Clear colorless
Exposure Limit NIOSH REL: TWA 50 ppm (240 mg/m3), STEL 100 ppm (485 mg/m3), IDLH700 ppm; OSHA PEL: ceiling 100 ppm; ACGIH TLV: TWA 50 ppm, STEL 100 ppm (adopted).
BRN 969405
PH 5-6 (500g/l, H2O)
Storage Condition 2-8°C
Explosive Limit 0.9-6.6%(V)
Refractive Index n20/D 1.539
Physical and Chemical Properties Properties: colorless liquid, heat or polymerization in the presence of a catalyst.
melting point -23.2 ℃
boiling point 165 ℃
relative density 0.9062
refractive index 1.53864
flash point 57.8 ℃
solubility insoluble in water, soluble in ether, benzene, chloroform.
Use Can be used for the production of coatings, plasticizers, also used as solvents

Product Detail

Product Tags

Risk Codes R10 – Flammable
R36/37 – Irritating to eyes and respiratory system.
R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description 61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDs UN 2303 3/PG 3
WGK Germany 2
RTECS WL5075300
TSCA Yes
HS Code 2902 90 00
Hazard Class 3
Packing Group III
Toxicity LD50 orally in Rabbit: 4900 mg/kg

 

Introduction

α-Methylstyrene is an organic compound. It is a colorless liquid with a distinctive odor and is poorly soluble in water, but can be soluble in organic solvents such as ethanol and carbon disulfide.α-methylstyrene is an important chemical raw material, which is widely used in synthetic fragrances, resins and synthetic rubber. It can be used as an intermediate in the synthesis of α-vinylbenzene, or as a monomer in the preparation of styrene-propylene polymers.There are several preparation methods for α-methyl styrene, and the commonly used is to heat the methyl styrene sulfonate to an appropriate temperature with a copper catalyst by thermal decomposition method, and α-methyl styrene can be generated.α-Methylstyrene is toxic and irritating to the eyes and skin. When using or storing, wear appropriate personal protective equipment and avoid contact with skin and eyes. It should be properly stored away from fire sources and high temperature environments to prevent fire or explosion.


  • Previous:
  • Next:

  • Write your message here and send it to us