page_banner

product

2-Methylundecanal (CAS#110-41-8)

Chemical Property:

Molecular Formula C12H24O
Molar Mass 184.32
Density 0.83g/mLat 25°C(lit.)
Boling Point 171°C(lit.)
Flash Point 200°F
JECFA Number 275
Water Solubility 1.3mg/L at 20℃
Vapor Presure 2.4Pa at 20℃
Storage Condition Room Temprature
Refractive Index n20/D 1.432(lit.)
Physical and Chemical Properties Colorless to yellowish liquid. Boiling point of 232 ℃, relative density of 0.822-830, refractive index of 1.431-1.436, flash point of 66 ℃, soluble in 4 volume of 80% ethanol and oil, acid value is less than or equal to 5. There is a special fat wax flavor, slightly with the flavor of ambergris, oak moss and terpene sweet orange oil, with the bottom aroma of tuberose-like, with strong aroma and good diffusion, and long fragrance.

Product Detail

Product Tags

Safety Description S24/25 – Avoid contact with skin and eyes.
WGK Germany 1
RTECS YQ1509000
Toxicity The acute oral LD50 value was reported as > 5 g/kg in the rat . The acute dermal LD50 for sample no. 71-16 was reported to be > 10 g/kg in the rabbit

 

Introduction

2-Methylundedehyde is an organic compound. The following is an introduction to the properties, uses, preparation methods and safety information of 2-methylundedehyde:

 

Quality:

2-Methylundedehyde is a colorless to yellowish liquid with a grease-like odor. It is less dense and almost insoluble in water, but it is miscible with most organic solvents. It is also intersoluble with many aromatic compounds.

 

Use:

2-Methylundedehyde is mainly used in the manufacture of fragrances. It has a unique and long-lasting fragrance and is commonly used in fragrance enhancers, perfumes, detergents, and soaps. It is also used as one of the ingredients in the scent of roses.

 

Method:

2-Methylundedehyde is usually prepared by the reaction of 1-undedecyne and an oxidizing agent (such as oxygen or air) in the presence of a catalyst. Reaction conditions can be optimized according to specific laboratory conditions, typically at high temperatures and pressures.

 

Safety Information: Chemical protective glasses, protective gloves and appropriate respiratory protection should be worn during use. Avoid inhaling it and try to maintain a well-ventilated working environment. It should be stored in an airtight container, away from ignition and oxidants, and avoid contact with oxidizing substances or alkaline substances.


  • Previous:
  • Next:

  • Write your message here and send it to us