page_banner

product

2-METHOXY-5-PICOLINE (CAS# 13472-56-5)

Chemical Property:

Molecular Formula C7H9NO
Molar Mass 123.15
Density 1.001±0.06 g/cm3(Predicted)
Boling Point 165°C(lit.)
Flash Point 64.377°C
Vapor Presure 1.151mmHg at 25°C
Appearance clear liquid
Color Colorless to Light yellow
Maximum wavelength(λmax) ['279nm(CH3CN)(lit.)']
pKa 3.69±0.10(Predicted)
Storage Condition Sealed in dry,Room Temperature

Product Detail

Product Tags

Risk and Safety

Hazard Symbols Xn – Harmful
Risk Codes R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.

 Introduction

2-methoxy-5-methylpyridine is an organic compound with the chemical formula C8H11NO. The following is an introduction to its nature, use, preparation and safety information:Nature:
-Appearance: 2-methoxy-5-methylpyridine is a colorless liquid.
-Density: The density of the compound is about 0.993 g/mL.
-Melting point and boiling point: The melting point of the compound is about -54°C, and the boiling point is about 214-215°C.
-Solubility: It has good solubility in common organic solvents.
-Chemical properties: 2-methoxy-5-methylpyridine can be used as a reagent that can participate in chemical reactions.Use:
2-Methoxy-5-methylpyridine is widely used in organic synthesis. It can be used as catalysts, ligands, reagents and intermediates for the synthesis of various organic compounds. For example, it can be used to prepare compounds such as pharmaceuticals, pesticides, dyes, and polymers.

Preparation Method:
A commonly used method for preparing 2-methoxy-5-methylpyridine is by methanation of methylpyridine. The specific preparation method can refer to the relevant literature or patent of organic synthetic chemistry.

Safety Information:
-2-methoxy-5-methylpyridine may be irritant and allergenic. Avoid contact with skin and eyes during handling, and pay attention to the use of personal protective equipment, such as laboratory gloves and goggles.
-During the use of this compound, it should be carried out in a well-ventilated place to avoid inhaling harmful vapors. If inhaled or ingested, seek medical attention immediately.


  • Previous:
  • Next:

  • Write your message here and send it to us