2-Fluoro-6-methylaniline（CAS# 443-89-0)
| Risk Codes | R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 – Irritating to eyes, respiratory system and skin. R41 – Risk of serious damage to eyes R37/38 – Irritating to respiratory system and skin. R22 – Harmful if swallowed |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S39 – Wear eye / face protection. S60 – This material and its container must be disposed of as hazardous waste. S23 – Do not breathe vapour. |
| UN IDs | UN2810 |
| WGK Germany | 3 |
| HS Code | 29214300 |
Introduction
2-Fluoro-6-methylaniline(2-Fluoro-6-methylaniline) is an organic compound with the chemical formula C7H8FN. The following is an introduction to its nature, use, formulation and safety information:
Nature:
- 2-Fluoro-6-methylaniline is a colorless to pale yellow liquid.
-It has a spicy and bitter taste. It has a density of 1.092g/cm³, a boiling point of 216-217°C and a melting point of -1°C.
-Its molecular weight is 125.14g/mol.
Use:
- 2-Fluoro-6-methylaniline is widely used as an important intermediate in organic synthesis.
-It can be used to synthesize compounds such as pesticides, medicines and dyes.
-The compound can also be used to synthesize rubber antioxidants, oil refining catalysts and polymers.
Preparation Method:
- 2-Fluoro-6-methylaniline can be prepared in a variety of ways.
-A common preparation method is obtained by fluorination reduction of p-nitrobenzene.
-It is also possible to introduce fluorine atoms through the hydroxide reaction of aniline under appropriate conditions.
Safety Information:
-Wear appropriate protective equipment such as safety glasses and gloves when handling 2-Fluoro-6-methylaniline.
-This compound may cause irritation and damage to the eyes, skin and respiratory system and contact should be avoided.
-When used indoors, adequate ventilation is required.
-Follow proper laboratory procedures and waste disposal measures.
