page_banner

product

2-Chloro-6-fluorotoluene(CAS#443-83-4)

Chemical Property:

Molecular Formula C7H6ClF
Molar Mass 144.57
Density 1.191 g/mL at 25 °C (lit.)
Boling Point 154-156 °C (lit.)
Flash Point 115°F
Water Solubility Insoluble
Vapor Presure 24.1mmHg at 25°C
Appearance clear liquid
Specific Gravity 1.191
Color Colorless to Light yellow to Light orange
BRN 1932657
Storage Condition Sealed in dry,Room Temperature
Refractive Index n20/D 1.504(lit.)
Physical and Chemical Properties This product is colorless liquid, B. p.154 ~ 1 56 ℃,n20D 1.4990, relative density 1.1910,f. P. 46 ℃, insoluble in water, soluble in toluene, ether and other solvents.
Use Used as pharmaceutical, pesticide intermediates

Product Detail

Product Tags

Risk Codes R10 – Flammable
R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S36/37 – Wear suitable protective clothing and gloves.
S37/39 – Wear suitable gloves and eye/face protection
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S16 – Keep away from sources of ignition.
S36 – Wear suitable protective clothing.
UN IDs UN 1993 3/PG 3
WGK Germany 2
TSCA T
HS Code 29039990
Hazard Note Irritant/Flammable
Hazard Class 3
Packing Group III

 

Introduction

2-Chloro-6-fluorotoluene is an organic compound. It is a colorless liquid with a sweet taste and a benzene-like odor. The following is an introduction to the properties, uses, preparation methods and safety information of 2-chloro-6-fluorotoluene:Quality:- Appearance: Colorless liquid- Solubility: Slightly soluble in water, soluble in organic solvents such as ethanol and acetone.Use:- 2-Chloro-6-fluorotoluene is an important chemical raw material, which is widely used in organic synthesis and pharmaceutical industry.- It can be used as a fluorinating agent, fluorinated reagent and a substitute for aromatic hydrocarbons.- In agriculture, it is also used as an insecticide and fungicide.Method:- 2-Chloro-6-fluorotoluene is generally obtained by the reaction of benzoic acid and hydrofluoric acid.- Specifically, benzoic acid is first reacted with hydrofluoric acid to form benzoyl fluoride, and then further fluorination is carried out under acidic conditions to obtain 2-chloro-6-fluorotoluene.Safety Information:- 2-Chloro-6-fluorotoluene is an irritating compound that should be avoided from contact with skin and eyes.- During operation, good ventilation measures should be taken and appropriate respiratory protective equipment should be worn.- In the event of an accidental leak, follow the appropriate emergency treatment methods and contact a professional for handling.It is important to dispose of 2-chloro-6-fluorotoluene in a laboratory or industrial setting in accordance with safe operating procedures.


  • Previous:
  • Next:

  • Write your message here and send it to us