page_banner

product

2 3 5-Trichloropyridine(CAS# 16063-70-0)

Chemical Property:

Physico-chemical Properties

Molecular Formula C5H2Cl3N
Molar Mass 182.44
Density 1.539±0.06 g/cm3(Predicted)
Melting Point 46-50 °C (lit.)
Boling Point 219 °C (lit.)
Flash Point >230°F
Water Solubility Slightly soluble in water.
Vapor Presure 0.213mmHg at 25°C
Appearance White crystal
Color Off-white to pale yellow
BRN 119384
pKa -2.92±0.10(Predicted)
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Refractive Index 1.572
MDL MFCD00043007

Product Detail

Product Tags

Risk and Safety

Hazard Symbols Xi – Irritant
Risk Codes R52/53 – Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
S37/39 – Wear suitable gloves and eye/face protection
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
UN IDs UN 2811 6.1/PG 3
WGK Germany 2
RTECS UU0525000
HS Code 29333990
Hazard Note Irritant

2 3 5-Trichloropyridine(CAS# 16063-70-0) Information

introduction 2,3, 5-trichloropyridine is a light yellow solid and an important fine chemical intermediate. 2,3,5-trichloropyridine reacts with alkali metal hydroxide to prepare 3,5-dichloro-2-pyridine phenol, which is an important raw material for the synthesis of insecticidal mites and herbicide oxaloether. 2,3, 5-trichloropyridine can also be further fluorinated to synthesize 2, 3-difluoro-5-chloropyridine, which is the basic raw material for the synthesis of herbicide alkynurate.
preparation 60g of methanol was added to a 1000mL four-mouth flask, 100g
2,3,5,6-tetrachloropyridine and 31.7g of hydrazine hydrate were added, the temperature was raised to 60-65 ℃, the heat preservation reaction was carried out for about 2 hours, the reaction was finished, the temperature was lowered to 0-5 ℃, the temperature was lowered to 1 hour, the solid was filtered, and the solid was 2,3, 5-trichlor6-hydrazinyl pyridine hydrate was dried to obtain 101.6g of white solid with 96% yield and 98.5% content. Add 100g
2,3,5-trichloro 6-hydrazinyl pyridine hydrate, 50g of 5% sodium hydroxide aqueous solution to 1000ml of four-mouth bottle, raise the temperature to 70-75 ℃, add 387.6g of 10% sodium hypochlorite aqueous solution dropwise, keep the temperature at 70-75 ℃, react for 1 hour, end the reaction, cool to 5-10 ℃, stir for 1 hour, filter to obtain 2,3, the crude 5-trichloropyridine is distilled under reduced pressure to obtain the product, which is a light yellow solid with a yield of 95% and a content of 98%.

  • Previous:
  • Next:

  • Write your message here and send it to us