page_banner

product

1,3-Dichloro-2-fluorobenzene(CAS#2268-05-5)

Chemical Property:

Molecular Formula C6H3Cl2F
Molar Mass 164.99
Density 1.3967 (estimate)
Melting Point 37-40°C(lit.)
Boling Point 168-169°C(lit.)
Flash Point 140°F
Vapor Presure 2.14mmHg at 25°C
Appearance Light brown-like crystals
Color White to Light yellow to Light orange
BRN 1862513
Storage Condition Sealed in dry,Room Temperature
Refractive Index 1.525
MDL MFCD00010307
Physical and Chemical Properties Melting Point 36-40°C
boiling point 168-169°C
flash point 60°C
Use Used as intermediates in pharmaceuticals, pesticides and dyes

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S37/39 – Wear suitable gloves and eye/face protection
UN IDs UN 1325 4.1/PG 2
WGK Germany 2
Hazard Note Irritant
Hazard Class 4.1
Packing Group III

 

Introduction

2,6-Dichlorofluorobenzene is an organic compound. The following is an introduction to its nature, use, preparation method and safety information:Quality:- Appearance: Colorless or light yellow liquid- Solubility: Soluble in organic solvents such as ether, alcohol and chloroformUse:- It can also be used as a source substance for fluorine compounds.Method:2,6-Dichlorofluorobenzene can be obtained by fluorination of dichlorobenzene. The specific preparation method can be achieved by the following steps:Dichlorobenzene is dissolved in an organic solvent such as ether.At low temperatures, hydrogen fluoride gas is gradually added to the reaction system.The reaction is carried out at the appropriate temperature and pressure to produce 2,6-dichlorofluorobenzene.Isolate and purify products.Safety Information:- 2,6-Dichlorofluorobenzene is toxic and may cause harm to humans. Pay attention to personal protective measures, such as wearing protective glasses and gloves, and ensure a well-ventilated environment when using or touching.- Avoid direct contact with skin, eyes, or respiratory system.- Dust, fumes or vapours should be avoided during operation.- Please read and follow the relevant safety operation guidelines and operating procedures carefully before use.- When recycling or disposing of waste, follow appropriate environmental regulations.


  • Previous:
  • Next:

  • Write your message here and send it to us