page_banner

product

1-Methylnaphthalene(CAS#90-12-0)

Chemical Property:

Molecular Formula C11H10
Molar Mass 142.2
Density 1.001g/mLat 25°C(lit.)
Melting Point −22°C(lit.)
Boling Point 240-243°C(lit.)
Flash Point 180°F
JECFA Number 1335
Water Solubility 0.026 g/L (25 ºC)
Solubility 0.026g/l
Vapor Presure 2 hPa (25 °C)
Appearance Liquid
Color Clear colorless to yellow
Exposure Limit ACGIH: TWA 0.5 ppm (Skin)
BRN 506793
pKa 37(at 25℃)
Storage Condition Store below +30°C.
Stability Stable. Combustible. Incompatible with strong oxidizing agents, oxygen.
Explosive Limit 0.7-6.5%(V)
Refractive Index n20/D 1.615(lit.)
Physical and Chemical Properties Character: colorless oily liquid with naphthalene-like odor.
melting point -30.6 ℃
boiling point 244.6 ℃
relative density 1.0202
refractive index 1.6170
flash point 82.2 ℃
solubility insoluble in water, soluble in ether and ethanol.
Use Used as surfactant, water reducing agent, dispersant, drug and other organic synthesis of raw materials

Product Detail

Product Tags

Risk Codes R22 – Harmful if swallowed
R36/37/38 – Irritating to eyes, respiratory system and skin.
R42/43 – May cause sensitization by inhalation and skin contact.
R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R39/23/24/25 -
R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed.
R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
Safety Description S7 – Keep container tightly closed.
S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 – Wear suitable protective clothing and gloves.
S23 – Do not breathe vapour.
S36 – Wear suitable protective clothing.
UN IDs UN 3082 9/PG 3
WGK Germany 2
RTECS QJ9630000
TSCA Yes
HS Code 29029080
Hazard Class 9
Packing Group III
Toxicity LD50 orally in Rabbit: 1840 mg/kg

 

Introduction

α-Methylnaphthalene is an organic compound.The properties of α-methylnaphthalene are as follows:1. Appearance: colorless to light yellow solid;4. Density: 1.048 g/cm³;5. Solubility: Soluble in organic solvents, such as ethanol and dimethylformamide.α-methylnaphthalene is often used as an important reagent in organic synthesis:1. Catalyst: It can be used as a catalyst for the preparation of β-ketoate ester and β-ketoacid;2. Fluorescent dyes: α-methylnaphthalene fluorescent properties, it is often used as a raw material for fluorescent dyes.Preparation method of α-methylnaphthalene:A commonly used preparation method is to obtain α-methylnaphthalene by methylating naphthalene. The specific steps are as follows:1. Take a reaction flask and add naphthalene and methyl iodide;2. Heat the reaction mixture so that the reaction takes place to produce α-methylnaphthalene.Safety information for α-methylnaphthalene: Here are some important considerations:1. Toxicity: α-methylnaphthalene is toxic, depending on the dose and mode of exposure. When coming into contact with α-methylnaphthalene, avoid direct contact with the skin and eyes, and avoid inhaling its vapors;2. Flammability: α-methylnaphthalene is a flammable substance. When storing and using, contact with open flames, high temperatures and oxidants should be avoided;3. Storage: α-methylnaphthalene should be stored in a cool, dry, well-ventilated place, away from open flames and other flammable materials.


  • Previous:
  • Next:

  • Write your message here and send it to us